ARM9 CPUS

Single-Board Computer P9X-Family

The P9X-920A-CPU

The P9X-920CPU Single Board Computer is an inexpensive OEM Board that features a 184Mhz ARM920T Core with integrated 10/100 Ethernet, USB Device, USB Host (x2), I2S Audio I/F, SDIO (4-Bit), Serial I/O (x4) and ETM (16-Bit). Additional board features are Battery-Backed RTC, S1D13706 QVGA LCD Controller, Dual CAN and SD/MMC Socket.

The P9X-920M-CPU

The P9X-920MCPU Single Board Computer is an inexpensive OEM Board that features a 200Mhz ARM920T Core with integrated LCD Controller, USB Device, SDIO (4-Bit) and Serial I/O (x2), AC'97 Codec I/F and ETM (8-Bit). Additional board features are Battery-Backed RTC, 10/100 Ethernet, Dual CAN and SD/MMC Socket. Detailed specification includes:

P9X-BR00

Very simple breakout board that gives access to all the connectors and is compatible with all P9X-xxx SBC's:

- Dual DB9's for RS-232 Serial I/O
- Dual DB9's for CAN and/or RS-485 Serial I/O
- RJ45 for 10/100 Ethernet Connection
- USB Device Connector
- Dual LED's for 10/100 Ethernet Status Display
- Three GPIO Driven LED's for Status Display
- Three GPIO Readable Switches for User Input
- 2.1mm Power Jack and Power On LED
- Compact 4.3" x 4.7" size

P9X-BR01CF

The P9X-BR01CF has all the functionality of the CSB300 plus Compact Flash and PS/2 keyboard/mouse. It also adds a dual USB host connector (usable if the CPU has 1 or 2 USB host ports), and 10-pin headers to allow easier access to SPI, I2C and I2S/AC'97 Audio and TTL UARTS:

- DB9 connectors for RS232 and CAN Serial I/O
- RJ45 for 10/100 Ethernet Connection
- USB Type B Device Connector*
- Dual LED's for 10/100 Ethernet Status Display
- Three GPIO Driven LED's for Status Display
- Three GPIO Readable Switches for User Input
- PS/2 Keyboard and Mouse Ports
- Type I/II Compact Flash Socket*
- Dual USB Host Connector*
- Access to additional UART's*
- Access to I2S and AC'97 Codec Interface*
- Access to I2C and SPI Ports for additional expansion
- Compact 4.3" x 4.7" size
* - Usable only if CPU Module has this function

P9X-BR02

The P9X-BR02 LCD Adapter Board connects any P9X-xxx series Single Board Computer to a 5.7" Sharp LM057QC1TT03 (or equivalent) 320x240 Color STN LCD an advanced software development platform. The P9X-BR02 can be mounted to the back of the LCD and comes with a 12" 40-Pin Ribbon Cable for connection to the P9X-xxx module. Note that the P9X-BR02 is only for use with P9X-xxx modules that have the stacking connectors. The P9X-BR02 has a multiplexer that allows the 8-bit LCD data to be swapped. This is because some P9X-xxx modules present the 8-Bit LCD data in reverse order from others:

- DB9 connectors for RS232 and CAN Serial I/O
- 2" 40-Pin Ribbon Cable for connection to P9X-xxx Module (included) - TSC2003 I2C Touch Screen Controller with Pen Interrupt (Interrupt function may not be supported by all CSB3xx modules)
- 4-Pin ZIF Connector for Touch Screen cable - On Board 28V Regulator for LCD Contrast Control. May be controlled via on-board potentiometer or via PWM signal from P9X-xxx(if supported by specific P9X-xxx)
- 4-Pin Header for Backlight Inverter Control
- 8-Bit Multiplexer for data swapping - 15-Pin Molex connector for LCD interface
- Can be directly mounted to LCD Display via double sided tape (not included).

Back

Homepage